Upgrading your bathroom with a Veken bidet is easier than you think. Just follow these simple steps and you’ll be enjoying a fresher, more hygienic experience in no time.
What You Need:
- Wrench
- Screwdriver
- Teflon tape
- Your new Veken bidet
Before You Start:
- Ensure the bidet model fits your toilet.
- Gather all the required tools.
- Give the toilet area a quick clean.
Installation Instructions:
- Turn off the toilet’s water supply line and flush to empty the tank.
- Unscrew the toilet seat and set aside.
- Position the bidet on the toilet mounting area and reattach the seat over top, securing it in place.
- Wrap Teflon tape around the threads of the toilet’s water supply fitting. Screw on the T-valve adapter.
- Reconnect the toilet’s water supply line to the bottom of the T-valve. Connect the bidet hose to the side toilet of the T-valve.
- Slowly turn the water back on and check for any leaks. Tighten connections if needed.
- That’s it! Test out your new bidet and adjust the water pressure to your desired setting.
Here is how to install by video guide:
How to install Veken Ultra-Slim Bidet Dual Nozzle Bidet Sprayer Version
Pro Tips:
- Read the instructions first for your specific model
- Use Teflon tape on all threaded connections to prevent leaks
- Don’t overtighten the connections
- Start with a low water pressure setting to avoid splashing
With just a few tools and less than an hour, you’ve upgraded your toilet into a modern bidet. Enjoy the refreshing clean every time!
