You've probably stood in the paper towel aisle staring at prices that keep climbing and thought, there has to be a better way. There is.
A bidet toilet attachment turns your existing toilet into a cleaner, more hygienic experience — no renovation, no electrician, no plumber.
Just a 15-minute install and you're done. If you've been curious about making the switch but aren't sure where to start, this guide walks you through everything: what to look for, how they work, and why the Veken Bidet keeps showing up at the top of nearly every best bidet attachment for toilet roundup.
What Makes a Great Bidet Toilet Attachment?
Not all bidets are created equal. A great bidet attachment does three things well: it fits your toilet without a fuss, delivers consistent water pressure you can actually control, and stays clean without much effort from you.
Here's what to evaluate before buying:
- Nozzle design — A dual nozzle (front and rear wash) is far more versatile than a single nozzle. Self-cleaning nozzles retract when not in use, which keeps things hygienic.
- Pressure control — You want a dial or knob that gives you a real range — from gentle to firm — not just on/off.
- Build quality — Stainless steel inlets resist corrosion. Plastic connections can crack over time, especially with hard water.
- Profile thickness — An ultra-slim design means the toilet seat sits nearly flat. Thick attachments create an uncomfortable tilt.
- Installation — If it takes more than 30 minutes, the design isn't good enough. The best attachments use a T-valve that taps into your existing supply line.
Pro tip: Measure the distance between your toilet's seat bolts before ordering. Most bidets fit standard two-bolt toilets, but it's worth confirming.
Non-Electric vs. Electric: Which Should You Choose?
Electric bidets heat water, dry you with warm air, and some even play music. They also cost $300–$600 and require an outlet behind your toilet that most bathrooms don't have.
A non-electric bidet attachment does the core job — washing — for $30–$60, with zero wiring and zero installation headaches. The water is cold (or ambient temperature depending on your pipes), but most users adapt within a few days and find it perfectly comfortable, especially in warmer months.
For the majority of households, a non-electric bidet attachment is the smarter starting point:
- Lower cost (often 10x cheaper than electric models)
- No electrical work or outlet required
- Simpler mechanism = fewer things to break
- Installs in under 15 minutes on most toilets
The Veken Bidet is a non-electric dual nozzle model that hits every practical checkbox — self-cleaning nozzles, a stainless steel inlet, and an ultra-slim profile that won't tilt your seat.
How to Install a Bidet Attachment in 15 Minutes
Installation intimidates people more than it should. Here's the actual process:
- Turn off the water supply — The valve is the football-shaped knob behind and beneath your toilet. Turn clockwise until it stops.
- Flush the toilet — Clears water from the tank so you're not working under pressure.
- Remove your toilet seat — Two bolts at the back. A flathead screwdriver handles most of them.
- Place the bidet attachment — Align it with the bolt holes. The nozzle should face forward, pointing toward the bowl.
- Reinstall the toilet seat — Right over the bidet plate. The seat bolts through both.
- Attach the T-valve — Disconnect the supply hose from your tank, screw on the T-valve, reconnect the supply hose to the bottom port of the T, and run the included bidet hose from the T-valve's side port to the bidet's inlet.
- Turn the water back on slowly — Check all connections for drips.
- Test — Turn the control knob and confirm pressure and direction.
Pro tip: Keep a small towel handy during the T-valve step. A cup or two of residual water will drain out when you disconnect the supply hose.
What to Expect Your First Week
The first spray is always a surprise — the water is colder than expected and the pressure feels strong. Both sensations normalize quickly, usually within 2–3 days.
A few adjustments help during the adjustment period:
- Start with the pressure knob at the lowest setting, then dial up until comfortable.
- Pat dry (you don't need as much toilet paper as you think — just a few squares).
- Clean the nozzle area weekly by activating the self-clean mode, which sends water over the nozzles without them extending into the bowl.
Toilet paper usage typically drops 50–80% for most households. At current prices, the attachment pays for itself within a few months.
FAQ
Will a bidet attachment fit my toilet?
Most bidet attachments fit standard elongated and round two-bolt toilets. Measure the distance between your toilet seat bolt holes — the standard spacing is about 5.5 inches. Some older or French curve toilets may not be compatible, so check the product specs before purchasing.
Is the water pressure adjustable?
Yes — any quality bidet attachment includes a pressure control dial or knob. The range matters: look for a smooth gradient from very gentle to firm. Cheap models have only 2–3 settings; better ones give you a continuous range.
Can I install a bidet attachment myself?
Absolutely. No plumbing experience required. The T-valve connection is a hand-tighten plus quarter-turn operation. The entire job takes 10–20 minutes for most people doing it for the first time.
Is a non-electric bidet attachment sanitary?
Yes. The nozzle retracts inside a protective guard when not in use. Self-cleaning nozzles rinse with fresh water before and after each use. The water comes directly from your supply line — the same water used everywhere else in your home.
How cold is the water?
It depends on your supply line temperature, which varies by season. In summer, water may come out around 60–70°F — barely noticeable. In winter, it can feel cold initially. Most users adapt quickly, and some prefer the refreshing feel. If temperature is a deal-breaker, look for a hot-and-cold bidet attachment that connects to your sink's hot water line.
The Bottom Line
If you're looking for the best bidet attachment for toilet use without spending a fortune, a non-electric dual nozzle model is the practical choice for most households. It's cleaner than toilet paper, cheaper long-term, and takes 15 minutes to install.
The Veken Bidet covers the essentials: dual nozzle with self-cleaning function, adjustable water pressure, stainless steel inlet for durability, and an ultra-slim profile that keeps your seat level. It's the kind of upgrade you wonder why you waited to make.